|
Product Details:
|
| Features: | Longer Service Life, Accurate Dimensions | Part Number: | 102302 |
|---|---|---|---|
| Product Descriptions: | Shaft | Suitable For: | Bullmer Cutter |
| Applicable For: | Automotive / Garment / Furniture Industries | Warranty: | 6 Months |
| Highlight: | 102302 Auto Cutter Parts,Auto Cutter Parts Shaft Procut,Bullmer Cutter Shaft Procut |
||
Features of Part Number 102302:
1. > Good reliability, longer service life.
2. > Stainless steel material.
3. > Accurate dimensions
4. > Sturdy construction.
5. > Applicability to a wide variety of mechanical and industrial control.
Product Specification:
| Part Number: | 102302 | |
| Description: | Shaft | |
| Application for: | PROCUT 5001 / 7501 | |
| Suitable for Cutter Machine: | Bullmer | |
| Package: | 1pcs / pp bag, Shipping by foam cotton and Carton for protection. | |
| Delivery Time: | In stock, we can send out within 24 hours after payment | |
| MOQ: | As an initial, less quantity is avaliable and trial order will be highly appreciated! | |
| Payment Term: | T/T, Western Union, Paypal, LC at sight, etc | |
| Quality guarantee: | Usually is 6 Months, and if there's any quality problem, we will be replace to customer immediately. | |
Yimingda can supply different spare parts and consumables (knife blade, sharpening stone, bristle block) used for different industry machines. Below are some of machine model parts we can supply:
1.> GT7250, S7200, GT5250, S5200, GT3250, S3200, XLC7000, GTXL, Paragon VX, Spreader SY105, XLS, Plotter.
2.> MP6, IX6, IX9, MP9, MH8, Q80, M88, Q25, Q50, VT2500, VT5000, VT7000.
3.> HY-H series Cutters, Spreaders for Yin.
4.> And for Bullmer, Investronica, Kuris, FK, OROX, IMA, etc.
Product's Picture :
More auto cutter parts for Bullmer:
| Part No. | Description |
| 84602001 | knife walking guide wheel shafts |
| 066758/70130837 | EtherCat couplers EK1100 |
| 6567 | Pneumatic sound absorber U-1/8 |
| 54782 | Pneumatic plug screw QS-1/8-6 |
| 52525 | Throttle back valve GRLA-M5-B |
| 60448 | Air service unit FRC-3/8-D-Midi |
| 61262 | Pressure gauge MA-50-16-1/4-EN |
| 50190 | Double nipple ESK-1/4-1/4 |
| 54795 | Pneumatic plug screw QSF-1/8-6 |
| 70103139/060726 | Elastic coupling D1=18H7/D2=22F7 |
| 70128102/105941 | TB751820-33-004 Sharpen motor mounting plate |
| 70135018/107353 | TB751820-38-030 Drive wheel |
| 102308 | Turn Plate Catch |
| 63113 | PN-End switch SME-8M-DS-24V-K2,5-OE |
| 54811 | Pneumatic L-plug screw QSML-M5-6 |
| 53414 | Grooved ball bearing 6002-ZR |
| 60570 | Ball bearing 10x22x6 |
| 58085 | Slinder Screw DIN 912 M4X8 12.9 |
| Sharpening Motor Holder | Sharpening Motor Holder -Bullmer |
| 102311 | Presser foot part |
| 84635010 | Internal Belt(RPF3230 13X560Li) |
| DSNU 32-115-P-A | Piston hydraulic for Bullmer |
| 102649 | Roll holder lower left |
| 112267 | Gear Flag |
| 60458 | Steel Ball RB-5 RS |
| 63067 | Special Oil |
| 102646 | Carrier Plate |
| 102650 | Roll holder lower right |
| 102651 | Roll holder upper left |
| 102652 | Roll holder upper right |
| 54854 | Cylinder screw DIN 912 M4x14 8.8 |
| 52409 | Screw M3*10 |
| 108201 | Gear flag 2 from 09/02 |
| 105821 | Grind Stone for 8001/8002/8003/E80 |
| 105935 | Cutting Blade for Bullmer Cutter, size: 223 * 8 *2.5mm |
| 109148 | Cutting Blade for Bullmer Cutter, size: 95 * 2 * 6mm |
| 104450 | Cutting Blade for Bullmer cutter, size: 223 * 2.5 *10/8mm |
| 105934 | Cutting Blade for Bullmer Cutter, size: 169 * 6 * 2mm |
| 223x9x3mm | Cutting Blade for Bullmer Cutter, size: 223 * 9 * 3mm |
| 01411/105935/70119001 | Cutting Blade for Bullmer Cutter, size: 223 * 8 * 2.5mm |
For more information about auto cutter products, please do not hesitate send Email to us, we'll reply you very soon. Any of your inquiry will be highly appreciated. Thank you!
Contact Person: Ms. Meiji
Tel: 86-13662270794
Fax: 86-755-2940-2086
